Листовая онокр прост д закрытые деталь1

Листовая онокр прост д закрытые деталь2

31, Solnechnaya st., Voronezh, 394026
E-mail: vtmp@tmp-press.com

Home ProductsSheet Metal Stamping EquipmentМоdel KВ2540A 1000 tf Capacity

Моdel KВ2540A 1000 tf Capacity

Теchnical Specifications

Nominal capacity, tf  1000
Rated distance of slide above bottom, mm 12
Slide stroke, mm 400
Continuous run frequency, min-1 20
Single strokes run frequency, min-1 15
Shut height, mm 730
Shut height adjustment,mm 200
Slide dimensions, mm
left to right
front to back
1600
1560
Bolster plate dimensions, mm
left to right
front to back
1600
1600
Main drive electric motor power, kW 75
Overall dimensions, mm
left to right
front to back
height above floor level
4700
3900
6620

The given model has the hydraulic safety device in the slide.

With optional changes to technical specifications.

 

Straight Side Single Action Single-Crank Press

Intended for production of a variety of parts from sheets using various cold stamping operations: blanking, punching, non-deep drawing, bending, etc. The press can perform flash trimming of billets, in a hot or cold state, produced using the hot-forging equipment.

Parts Stamped on the Press

Листовая онокр прост д закрытые деталь01

Листовая онокр прост д закрытые деталь02

Back to the Product List